Log cabins, also known as wooden houses or chalets, stand out as an alternative for those who want to escape the traditional (and most often more expensive) option, which is the concrete house. Regarding typical houses in India, prefabricated wooden houses are cheaper by about 40%.
In addition to having a single floor and characterized by a simpler architectural design, log cabins are very simple as a project, faster to be completed, and generally less complex in its construction than a traditional house. Being built mostly prefabricated or from recycled wood, it avoids the excessive use of material, human resources, and construction time.
There are log cabins sprouting up everywhere in India, especially in the major cities like Mumbai and Bangalore. The highlands in Dharamsala and the coastal area of Goa are also some spots where you may find log cabin homes in India.
Well, prices will vary based on the specifications and customization a client would want. To give you a rough idea, a wooden log house can cost about INR 1700—INR 2600 per square feet, depending on the quality of wood used and the design. There are certain additional costs too like a 5 percent
Well, prices will vary based on the specifications and customization a client would want. To give you a rough idea, a wooden log house can cost about INR 1700—INR 2600 per square feet, depending on the quality of wood used and the design. There are certain additional costs too like a 5 percent VAT, etc.A cabin log house, or log building, is a structure built with horizontal logs interlocked at the corners by notching. Logs may be round, squared or hewn to other shapes, either handcrafted or milled. The term “log cabin” generally refers to a smaller, more rustic log house, such as a hunting cabin in the woods, that may or may not have electricity or plumbing.Pre-fabricated log houses for export were manufactured in Norway from the 1880s until around 1920 by three large companies: Jacob Digre in Trondheim, M. Thams & Co. in Orkanger, and Strømmen Trævarefabrik at Strømmen. They were factory built from sawn or milled logs, numbered and dismantled for transportation, and reassembled on the buyer’s site. Buyers could order standard models from catalogs, custom-made houses designed by architects employed by the companies, or houses of their own design. Log houses from Thams were exhibited at the Exposition Universelle (1889) in Paris.
During the 1920s the first American milled log houses appeared on the market, using logs which were pre-cut and shaped rather than hand-hewn. Many log houses today are of the milled variety, mainly because they require less labor-intensive field work than handcrafted houses. There are about 500 companies in North America which build the handcrafted, scribe-fit type of log house.
Logs that are cut from the butt forest, brought to a mill or to a log-house construction yard, have their bark removed and are used to build a log-house shell (handcrafted log houses), or sent through profiling machines (manufactured logs) are usually referred to as “green” logs if they have not been air- or kiln-dried. “Green” does not refer to color, but to moisture content (MC). The actual moisture content of “green” logs varies considerably with tree species (cedar, fir, spruce, pine etc.), the season in which it was cut, and whether sapwood or heartwood is being measured. Green logs may have a moisture content ranging from about 20% to 90% (the oven-dry method of measuring MC).
One type of air-dried log is “dead standing,” which refers to trees which have died from natural causes (bug kill, virus, fire etc.) and cut down after they died. Standing dead trees may be cut one month or several decades after they died, so the term “dead standing” does not necessarily mean the logs have dried down to equilibrium moisture content. Dead standing logs can be green, or more-or-less dry.
After construction, green logs dry in service in the log building. Within about four years, green logs which are part of a completed log house reach equilibrium with local conditions and have an equilibrium moisture content (EMC) of between 6% and 12%. The actual EMC varies with local climate, season and location.[
cabin house in india Log construction was the most common building technique in large regions of Sweden, Finland, Norway, the Baltic states and Russia, where straight and tall coniferous trees, such as pine and spruce, are readily available. It was also widely used for vernacular buildings in Eastern Central Europe, the Alps, the Balkans and parts of Asia, where similar climatic conditions prevail. In warmer and more westerly regions of Europe, where deciduous trees predominate, timber framing was favoured instead.
his type is mostly used for gastronomic activity. The pavilions are installed at locations that are most accessible for the clients, they are not tied to the ground so they could be easily moved or expanded if one plans to develop the business. They are often utilized as bars, pubs, restaurants or fast food restaurants. Apart from electric installation, gastronomic pavilions can be equipped with sanitary rooms and devices, as well as gastronomic annexes. Modern look corresponding client’s requirements for finishing dressings and decorations is in favor for gaining new customers who may find modern module constructions attractive.
Our facility is certified, attested and granted necessary permissions of national institutes. As a result our pavilions could be comfortably used as gastronomic facilities.
Our extensive product range has garden buildings for every use. If you require something a little more unique we would be delighted to design a building just for you.All of our products are made from the finest FSC certified timbers from managed forests. We choose only the best materials ensuring a lifetime of service and use.Designed and crafted in Staffordshire, we are bound to provide the greatest level of quality in design and build. All of our buildings and joinery are hand-made to ensure quality throughoutWe can personally install all buildings, providing a worry free professional build. Expert, friendly advice is always free.Manufactured in our extensive workshop to your specification. Our experienced team are on hand to offer advice and ensure that your building is individually designed to suit your needs, whether that’s an extra living space, a room with a view or a peaceful escape.
his cabin has been renovated with your vacation needs in mind. Full size bathroom with shower and soaking tub, kitchen with lots of room and all the necessary items stocked for you! Three bedrooms, and a fabulous new hot tub. There is plenty of outdoor space and privacy for you and your family to play and relax five minutes from the Entrance to Mt. Rainier National Park.
Indian Henry’s looks and feels brand new, but actually this authentic Ashford Retreat is 102 years old! My family and I lovingly restored the cabin from top to bottom in 2013/14. New wood flooring throughout, lodge furniture and décor bring this cabin back to the woodland retreat it was meant to be. Everything is provided, just pack your clothes and food and get away from it all!
A log house, or log building, is a structure built with horizontal logs interlocked at the corners by notching. Logs may be round, squared or hewn to other shapes, either handcrafted or milled. The term “log cabin” generally refers to a smaller, more rustic log house, such as a hunting cabin in the woods, that may or may not have electricity or plumbing.
Log construction was the most common building technique in large regions of , the and , where straight and tal trees, such as pine and spruce, are readily available. It was also widely used for buildings in Eastern lthethe and parts of where similar climatic conditions prevail. In warmer and more westerly regions of Europe, where trees predominate, was favoured instead.
he logs in log houses have a varying degree of moisture content; all logs have moisture when freshly cut. In the case of handcrafted logs moisture will naturally leave the timber, drying it out until it stabilizes with its climate. This drying-out causes movement and shrinking of the log’s diameter. As logs and timbers dry, the differential shrinkage (radial versus tangential) causes small cracks (known as “checks”) to open slowly over time. Checking is a natural process in both air- and kiln-dried logs. This occurs in all log houses regardless of construction method or how the timber is allowed to dry, and is considered normal.
Milled logs are processed in a different manner from handcrafted logs. Logs destined to become milled logs may become one of several types, depending on the desired quality and results
ome log home companies let the fresh-cut logs (or milled timbers) sit outside in the open air to dry naturally. The timbers may be stacked with spacers (known as “stickers”) between them. This process allows the moisture content of the logs to naturally fall as the timber dries. In areas of high humidity, it may require as much as one year per inch of log thickness to dry. Arid climates may require less. A log with a diameter of 8 inches will usually reach equilibrium in about 18 months in the Rocky Mountains of North America. Air circulation is critical or the logs may begin to rot before properly drying, especially in humid regions. If the logs are to be dried to equilibrium with the local climate the process may take several years, depending on the location and size of the timbers. In some environments, the logs must be kept under some type of roof or cover to reduce the impact of rain storms on the drying process.
Once the logs have dried for the desired length of time, they are profiled prior to shipping. Profiling usually does not take place until shortly before shipment, to ensure that the logs stay as uniform as possible. It is uncertain whether this process is advantageous; it depends on many factors such as local climate, wood species, its size, and the location of the log structure.
Laminated” or “engineered” logs are a different approach to log-house building. Full trees or (alternatively) sawn cants (unfinished logs to be further processed) are brought to a mill with a dry kiln, the bark is removed and the trees are sawn into boards usually no more than two inches thick. These boards are then taken to the dry kiln, where (because of their size) they can be dried without causing severe damage to the wood. Timber destined for glue lamination must be brought down below 15% moisture before the lamination process will work, so typically these timbers are dried to around 8-10% moisture. The drying process varies on the species of lumber, but can be done in as little as a week. Once the drying process is complete the planks are sent through a surfacer (or planer), which makes the face of the lumber perfectly smooth. These planks travel to a machine, which then spreads a special glue on the interior boards.
Depending on the type of glue and type of mill, there are two ways to finish the lamination process. One type of glue reacts with radio-frequency (RF) energy to cure the glue in minutes; the other uses a high-pressure clamp, which holds the newly reassembled timbers under pressure for 24 hours. Once the glue has dried, the result is a “log cant” that is slightly larger than the buyer’s desired profile. These log cants are run through a profiler, and the end result is a log that is perfectly straight and uniform. Some mills are capable of joining together small timbers by using a combination of face and edge gluing and a process known as finger- jointing. Boards which would be scrap at another mill may be used in the center of a laminated log or beam to minimize waste
- D-shape logs: round on the outside and flat inside
- Full-round logs: fully round inside and out
- Square logs: flat inside and out, and may be milled with a which could be chinked. When dealing with milled logs, chinking is a personal preference and not required to seal a house; however, a log house will eventually leak if it is not properly sealed.
- Swedish Cope logs: round inside and out, with a half-moon-shaped groove on the bottom
Nearly every profiled log on the market features an integralmilled into the top and bottom of the log; this aids in stacking, and reduces the need for chinking. Wood is not airtight — caulking or chinking will improve energy efficiency.
- Scandinavian Full-Scribe (also known as the “chinkless method”) is naturally-shaped, smoothly-peeled ogs which arand custom-fitted to one another. They are notched where they overlap at the corners, and there are several ways to notch the logs.
- In the flat-on-flat method, logs are flattened on the top and bottom and then stacked (usually with butt-and-pass corners).
- Milled log houses are constructed with a tongue-and-groove system which helps align one log to another and creates a system to seal out the elements.
- With the tight-pinned butt and pass method, the logs are not notched or milled in any way. They are in a single course and do not overlap; vertical pairs of logs are fastened with tight, load-bearing steel pins.Once fabricated and assembled, the shell of the log house may be disassembled and the parts shipped to the building site. This allows for centralized manufacturing of the house, and relatively quick construction on site. Full-scribe-fit handcrafted log construction is a method of precisely marking where to cut each individual wall log to provide a tight fit between naturally-shaped logs along their entire length and in the corners. A high degree of craftsmanship is required for success in this method, and the resulting tight fit of naturally-shaped logs have aesthetic appeal.Log houses which settle require s over all window and door openings, adjustable jacks under vertical elements (such as columns and staircases) which must periodically be adjusted as the building settles, allowances in plumbing, wiring, and ducting runs, and fasteners for the walls themselves to prevent upliftWe are one of the leading manufacturer and supplier of the finest quality Portable Cabin. We manufacture the offered cabin using high-grade raw material and modern techniques in accordance with the set industrial standards.Keeping in mind the end goal to convey the perfect range, these items are analyzed under the examination of our talented experts against the different parameters of value. Owing to features like high tolerance, corrosion resistance and durability, the offered cabin is widely praised by our clients. Our offered cabins have attractive interiors and various amenities for erecting air-conditioners and supplying electricity.We offer this cabin in diverse sizes at nominal prices and can be effectively designed on client’s specific demand.These portable cabins are highly applicable to be installed in offices, work site buildings,commercial and domestic sectors. Since theseportable cabins are customized make hence the space available in these cabins are more than any other available option also the level of insulation in this cabin are far more superior than any other type of cabins. Our offered cabins are Portable and can be transported from one Site to another Site within Minimum time, thereby, saving time and Money while executing Major Projects. We are committed to providing quality service at each stage of the project, from conception, design, manufacturing and Portability.These cabins are flexible and are equipped with all the necessities so as to provide a completed project to our valued patrons. Moreover, client can be availed these products from us at reasonable prices.We are one of the leading manufacturers, wholesalers, retailers and exporters of a wide assortment of Portable Cabins, Interiors and Prefabricated Structures. Besides, we also offer different Prefabrication and Designing services. Fabricated using high-grade raw material, these products are known for high structural strength, corrosion & abrasion resistance, attractive design and durability. Further, we also offer customized solutions in these products to suit varied requirement and needs of the clients.A chocolate-box cottage that is anything but chintzy inside. Owner Amanda Bannister has created a living, breathing celebration of home-grown craft loveliness within these 19th-century Shaftesbury-stone walls. Designs from British ceramicists, English cartographers, Irish carpet-makers and Welsh painters are set alongside Victorian chests and Edwardian consoles in rooms decked in William Morris wallpaper. It feels cosy, clever and modern. Practically everything you can sit on or pick up can be bought – with a little discount too – but it’s not just a matter of style over substance. There’s a Roberts radio at every bedside (there are three bedrooms in the main house and a one-bed studio next door to spill over into), gorgeous Bramley products in the bathrooms, a gadget-stocked Shaker-style deVOL kitchen and Netflix in the sitting room. You’ll also find a bookcase of classic paperbacks, tweed Guillotine gilets hanging under the stairs to be borrowed and a knock-your-socks-off hamper on arrival, packed full of artisan food If you dream about a unique and natural house of premium quality, you have now found your home. Honkarakenne suppliesand for more organic, healthy and ecological living. Our log homes are crafted from the finest Finnish wood, with 60 years of knowledge and experience. Whether you dream of a or a we want to help you to realise your perfect home with natural and 100 % renewable wood..accomplished in building several forms of log housing, having different methods of corner timbering, and they utilized both round and hewn logs. Their log building had undergone an evolutionary process from the crude “pirtti”…a small gabled-roof cabin of round logs with an opening in the roof to vent smoke, to more sophisticated squared logs with interlocking double-notch joints, the timber extending beyond the corners. Log saunas or bathhouses of this type are still found in rural Finland.”By stacking tree trunks one on top of another and overlapping the logs at the corners, people made the “log cabin”. They developed interlocking corners by notching the logs at the ends, resulting in strong structures that were easier to make weather-tight by insertingor other soft material into the joints. As the original t extended over the coldest parts of the world, there was a prime need to keep these cabins warm. The properties of the solid wood were a great advantage over a construction covered with animal skin
- immigrants also used this technique. The contemporaneous British settlers had no tradition of building with logs, but they quickly adopted the method. The first
- s did not widely use log cabins, building in forms more traditional to them.
- Few log cabins dating from the 18th century still stand, but they were often not intended as permanent dwellings. Possibly the oldest surviving log house in the United States is the
- (ca. 1640) in New Jersey. Settlers often built log cabins as temporary homes to live in while constructing larger, permanent houses; then they often used the log cabins as outbuildings, such as barns or
- The most important aspect of cabin building is the site upon which the cabin was built. Site selection was aimed at providing the cabin inhabitants with both sunlight and drainage to make them better able to cope with the rigors of frontier life. Proper site selection placed the home in a location best suited to manage the farm or ranch. When the first pioneers built cabins, they were able to “cherry pick” the best logs for cabins. These were old-growth trees with few limbs (knots) and straight with little taper. Such logs did not need to be hewn to fit well together. Careful notching minimized the size of the gap between the logs and reduced the amount of chinking (sticks or rocks) or daubing (mud) needed to fill the gap. The length of one log was generally the length of one wall, although this was not a limitation for most good cabin builders.
Decisions had to be made about the type of cabin. Styles varied greatly from one part of the US to another: the size of the cabin, the number of stories, type of roof, the orientation of doors and windows all needed to be taken into account when the cabin was designed. In addition, the source of the logs, the source of stone and available labor, either human or animal, had to be considered. If timber sources were further away from the site, the cabin size might be limited.
The most important aspect of cabin building is the site upon which the cabin was built. Site selection was aimed at providing the cabin inhabitants with both sunlight and drainage to make them better able to cope with the rigors of frontier life. Proper site selection placed the home in a location best suited to manage the farm or ranch. When the first pioneers built cabins, they were able to “cherry pick” the best logs for cabins. These were old-growth trees with few limbs (knots) and straight with little taper. Such logs did not need to be hewn to fit well together. Careful notching minimized the size of the gap between the logs and reduced the amount of chinking (sticks or rocks) or daubing (mud) needed to fill the gap. The length of one log was generally the length of one wall, although this was not a limitation for most good cabin builders.
Decisions had to be made about the type of cabin. Styles varied greatly from one part of the US to another: the size of the cabin, the number of stories, type of roof, the orientation of doors and windows all needed to be taken into account when the cabin was designed. In addition, the source of the logs, the source of stone and available labor, either human or animal, had to be considered. If timber sources were further away from the site, the cabin size might be limited
The modern version of a log cabin is the
- , which is a house built usually from milled logs. The logs are visible on the exterior and sometimes interior of the house. These cabins are mass manufactured, traditionally in Scandinavian countries and increasingly in eastern Europe. Squared milled logs are precut for easy assembly. Log homes are popular in rural areas, and even in some suburban locations. In many resort communities in the United States West, homes of log and stone measuring over 3,000 sq ft (280 m2) are not uncommon. These “kit” log homes are one of the largest consumers of logs in the Western United States.In the United States, log homes have embodied a traditional approach to home building; one that has resonated throughout American history. It is especially interesting to discover that, in today’s world, log homes represent a technology that allows a home to be built with a high degree
- . In fact, log homes are frequently considered to be on the leading edge of the
- were a popular type of barn found throughout the U.S. south and southeast regions. Crib barns were especially ubiquitous in the Appalachian and Ozark Mountain states of North Carolina, Virginia, Kentucky, Tennessee and Arkansas.In Europe, modern log cabins are often built in gardens and used as summerhouses, home offices or as an additional room in the garden. Summer houses and cottages are often built from logs in northern Europe.
Chinking refers to a broad range
- or other infill materials used between the logs in the construction of log cabins and other log-walled structures. Traditionally, dried mosses, such as Pleurozium schreberi or Hylocomium splendens, were used in the Nordic countries as an insulator between logs. In the United States, Chinks were small stones or wood or corn cobs stuffed between the logsLog cabins were constructed with either a roof structure or a roof structure. A purlin roof consists of horizontal logs that are notched into the gable-wall logs. The latter are progressively shortened to form the characteristic triangular gable end. The steepness of the roof was determined by the reduction in size of each gable-wall log as well as the total number of gable-wall logs. Flatter roofed cabins might have had only 2 or 3 gable-wall logs while steeply pitched roofs might have had as many gable-wall logs as a full story. Issues related to eave overhang and a porch also influenced the layout of the cabin.
The decision about roof type often was based on the material for roofing like bark. Milled lumber was usually the most popular choice for rafter roofs in areas where it was available. These roofs typify many log cabins built in the 20th century, having full-cu rafters covered with pine and shingles. The purlin roofs found in rural settings and locations, where milled lumber was not available, often were covered with long hand-split shingles.